|
|
|
|
Open
Frame Thermostats  |
| |
A10, A20, A30, A40
These
thermostats are specificaly designed for electrical
appliances, such as hair dryers, hairdressing equipment,
cooking equipment, air heaters. These are factory
calibrated bimetals to snap open at a predetermined
temperature. Reset is preceeded by significant cooling.
|
Applications
Household appliances, Electronics,
Fan Heaters, Automotive Industry
Benefits
More safety by self hold types, PCB
terminals available, Customized ratings, Up to 100,000
cycles |
| >
Technical Data (standard types) |
| ratings |
A10V
A11V |
A20V
A21V |
A30V
A31V |
A40V
A41V |
| function |
automatic |
manual |
self
hold
230 V |
self
hold
120 V |
| version |
normally
closed |
VDE |
rated
current at 50 / 60 Hz ( power factor 0.95 / 0.6 ) |
16
A / 2.5A
(250 V) |
19.2
A / 2.5A
(250 V) |
16
A / 2.5A
(230 V) |
19.2
A / 2.5A
(120 V) |
| switching
cycles |
10,000 |
1,000 |
10,000 |
8,000 |
| temperature
range Ta (steps in 5 K) |
70°C ... 160°C |
70°C
... 130°C / 140°C |
70°C
... 160°C |
UL |
rated
current at 50 / 60 Hz ( power factor 1.0 / 0.75 ) |
16
A / 6.3A (250 V) |
16
A / - (125 V) |
| switching
cycles |
6,000 |
| temperature
range Ta (steps in 5 K) |
70°C
... 160°C |
| max.
current at 250 V 50/60Hz( power factor 0.95 ) |
25 A |
| switching
cycles under max. current |
200 |
| tolerance |
standard:
+/- 5 K |
| feature
of automatic action |
1.B,
2.B |
2.B |
2.C |
| contact
resistance |
<50
mΩ |
| hysteresis
/ reset temperature 1) |
30
K +/- 15 K / - |
-
/ < -20°C; < -10°C |
-/
< -20°C 2)
|
suitable
for use in protection category |
I,
II |
| approvals |
VDE
/ ENEC |
EN
60730-1 / -2-9 |
UL |
UL
873 |
CSA |
C22.2 No. 24 3) |
| CQC |
GB14536.1-1998
/ GB14536.10-1996 4) |
1) at the Ta (upper and lower) limits the
hysteresis could deviate
2) without air ow
3) different power rating
4) details on request |
| >
Terminals |
code |
used
in TCO |
illust. |
drawing
dimensions (mm) |
technical
specification |
approvals |
standard |
A10,
A11, A12, A13
A20, A21, A22, A23
A30, A31, A32, A33
A40, A41, A42, A43 |
|
|
terminals
for soldering,
screwing, riveting or
welding
CuNi18Zn20 1)
|
VDE,UL,
CSA |
A321 |
A10,
A12
A20, A22
A30, A32
A40, A42 |
|
|
SMD
terminals
CuNi18Zn20 1) |
VDE,
UL |
A322 |
A10,
A12
A20, A22
A30, A32
A40, A42 |
|
|
THT
terminals
CuNi18Zn20 1) |
VDE,
UL |
1)
P types have terminals of CuFe2P material
| >
Standard Types |
TCO |
illust. |
drawing
dimensions (mm) |
technical
specification |
approvals |
standard |
current-time
based 1) |
A10V |
A12V |
|
|
base
of thermosetting plastic |
VDE,UL,
CSA |
A11V
A21V
A31V
A41V |
A13V
A23V
A33V
A43V |
|
|
screw-on
fixing
base of thermosetting plastic |
VDE,
UL, CSA |
A20V |
A22V |
|
|
manual
reset
base of thermosetting plastic
possible srew-on fixing
dimensions see above |
VDE,
UL, CSA |
| A30V
A40V |
A32V
A42V |
|
|
voltage
maintained PTC
120V or 230V
base of thermosetting plastic
possible screw-on fixing
dimensions see above |
VDE,
UL, CSA |
| 1)
For current-time based types (execution D, J, K, L,
M, P, R, V) the following information must be provided:
•
DC or AC voltage UN in Volts.
• Continuous operating current Ic
in Amps at which the switch must not respond.
• Current level I0 in Amps at which
the switch must respond.
• Response time t0 (in seconds
± tolerance) within which the switch must
respond after reaching I0.
•
Ambient
temperatures which could be experienced both in
normal operation and in switching conditions.
• Maximum current in Amps.
------
For
special applications version P is available with
a very low self heating rate.
Version A10H is VDE approved with 100,000 cycles
at 1 Amp and 30,000 cycles at 10 Amps also.
Manual reset: The maximum operating force must not
exceed 6 N. The control should not be reset before
the starting conditions are reached, meaning there
should be a satisfactory cooling down time!
Technical data on request
|
| >
Characteristics of current vs. self heating and current
vs. time |
 |
| >
Ordering & Marking Example |
| MIC
Ordering Example [ A10V12005A321
] |
| A10 |
V |
120 |
05 |
A321 |
| type |
execution |
temperature |
tolerance |
terminal
code |
| Marking |
A10V
type and execution
E country (E=Spain)
12005 response temperature
(120°C), tolerance (± 5K)
049 date of manufacture (April 2009)
A12D type and execution
H country (H=China)
--123 customised type with drawing
number
049 date of manufacture (April 2009)
|
|
|
Heater
Protection
Canadian Thermostats & Control Devices Ltd.