|
|
|
|
Enclosed
Radial Lead Thermostats  |
| |
D10, D20, D30, D40
|
Applications
Household appliances, Electronics,
Fan Heaters, Automotive Industry
Benefits More safety by self
hold types, Various housings, Manual reset
|
| >
Technical Data (standard types) |
| ratings
\ TCO |
D10V |
D20V |
D30V |
D40V |
| function |
automatic |
manual |
self
hold
230 V |
self
hold
120 V |
| version |
normally
closed |
VDE |
rated
current at 50 / 60 Hz ( power factor 0.95 / 0.6 ) |
16
A / 2.5A
(250 V) |
19.2
A / 2.5A
(250 V) |
16
A / 2.5A
(230 V) |
19.2
A / 2.5A
(120 V) |
| switching
cycles |
10,000 |
1,000 |
10,000 |
8,000 |
| temperature
range Ta (steps in 5 K) |
70°C ... 160°C |
70°C
... 130°C / 140°C |
70°C
... 160°C |
UL |
rated
current at 50 / 60 Hz ( power factor 1.0 / 0.75 ) |
16
A / 6.3A (250 V) |
16
A / - (125 V) |
| switching
cycles |
6,000 |
| temperature
range Ta (steps in 5 K) |
70°C
... 160°C |
| max.
current ( power factor 0.95 ) |
25 A |
| switching
cycles under max. current |
200 |
| tolerance |
standard:
+/- 5 K |
| feature
of automatic action |
1.B,
1.C |
2.B,
2.C |
2.C.AK |
| contact
resistance |
<50
mΩ |
| hysteresis
/ reset temperature 1) |
30
K +/- 15 K / - |
-
/ < -20°C; < -10°C |
-/
< -20°C 2)
|
degrees
of protection provided by
enclosures (EN 60529) |
IP00 |
|
suitable
for use in protection category |
I,
II |
| approvals |
VDE
/ ENEC |
EN
60730-1 / 2-3 3) / -2-9 |
|
UL |
UL
873 |
|
CSA |
C22.2 No. 24 4) |
|
CQC |
GB14536.1-1998
/ GB14536.10-1996 5) |
1) at the Ta (upper and lower) limits the hysteresis
could deviate
2) without air ow
3) D12D only/2,5A/max. 140°C
4) different power rating
5) details on request |
| >
Terminals |
code |
used
in TCO |
illust. |
drawing
dimensions (mm) |
technical
specification |
approvals |
standard |
D10,
D12
D20, D22
D30, D32
D40, D42 |
|
|
terminals
for soldering
CuNi18Zn20 1)
|
VDE,UL,
CSA |
A308 |
D10,
D12
D20, D22
D30, D32
D40, D42 |
|
|
terminals
for soldering
bent 90°
CuNi18Zn20 1)
|
VDE,
UL, CSA |
1)
P types have terminals of CuFe2P material
| >
Standard Types |
TCO |
illust. |
drawing
dimensions (mm) |
technical
specification |
approvals |
standard |
current-time
based 1) |
D10V |
D12V |
|
|
base
of thermosetting plastic |
VDE,UL,
CSA |
D10V
D30V
D40V
with
housing G115
|
D12V
D32V
D42V
with
housing G115 |
|
|
housings
PPS
base of
thermosetting plastic |
VDE,
UL, CSA |
D20V
with housing
G776 |
D22V
with housing
G776 |
|
|
manual
reset
housings PA/PPS
base of
thermosetting plastic |
VDE,
UL, CSA |
| D10V
with housing G774 |
D12V
with housing G774 |
|
|
housings
PA/PPS
base of
thermosetting plastic |
VDE,
UL, CSA |
|
1) For current-time based types (execution D, J, K,
L, M, P, R, V) the following information must be provided:
•
DC or AC voltage UN in Volts.
• Continuous operating
current IC in Amps at which the switch
must not respond.
• Current level I0
in Amps at which the switch must respond.
• Response time t0
(in seconds ± tolerance) within which the
switch must respond after reaching I0.
•Ambient temperatures which could be
experienced both in normal operation and after
the switch has responded.
•
Maximum current in Amps.
*
temperature sensitive area.
____________
•
For special
applications version P is available with a very
low self heating rate.
•
Manual reset: The maximum operating force should
not exceed 6 N. The control should not be reset
before the starting conditions are reached, meaning
there should be a satisfactory cooling down time!
Technical data on request.
|
| >
Characteristics of current vs. self heating and current
vs. time |
 |
| >
Ordering & Marking Example |
| MIC
Ordering Example [ D10V12005A308
] |
| D10 |
V |
120 |
05 |
A308 |
| type |
execution |
temperature |
tolerance |
terminal
code |
| Marking |
D10V
type and execution
E country (E=Spain)
12005 response temperature
(120°C), tolerance (± 5K)
049 date of manufacture (April 2009)
D12D type and execution
H country (H=China)
--123 customised type with drawing
number
049 date of manufacture (April 2009)
|
|
|
Heater
Protection
Canadian Thermostats & Control Devices Ltd.