|
|
|
|
Protection
For Coils / Windings
|
|
F11U (Single Contacts)
>
Online Tech Info
This thermostat operates as a thermal
cutout. A thermally sensitive bimetal snap-element
with single contacts either opens or closes an electrical
circuit by switching at a pre-set response temperature.
Reset follows automatically after a considerable drop
in temperature.
|
| Applications
Single Phase Motors,
Generators, Convertors, Transformers, Pumps, Heating
Elements, Signal Transmitters, Fire Detectors, Magnets,
Relays, Chokes, Coils, Power Supplies, Inverters |
|
|
|
B12 (Double Contacts)
> OnlineTech Info
This thermostat operates as a thermal
cutout. A thermally sensitive bimetal snap-element
with double contacts (single contacts for type B12)
either opens or closes an elecrtical circuit by switching
at a pre-set response temperature. Reset follows automatically
after a considerable drop in temperature.
B12 > PDF
Tech Info, Schematics and More
|
| Applications
Single Phase Motors,
Generators, Convertors, Transformers, Pumps, Heating
Elements, Signal Transmitters, Fire Detectors, Magnets,
Relays, Chokes, Coils, Power Supplies, Inverters |
|
|
Current
Sensitive Thermal Protection For Coils / Windings
|
|
T 10, T 11, T 21,
T 21, T22 > Online
Tech Info
These thermal cutouts operate by means
of a thermally sensitive bimetal snap-element which
switches a double electrical contact when reaching
a pre-set response temperature. They can be normally
open or normally closed. The electrical current being
switched flows through the bimetal element, which
therefore gives a combination of temperature and current
- sensitivity.
T 10, T 11, T 20, T 21, T22
> PDF
Tech Info, Schematics and More
|
| Applications
Single Phase Motors,
Generators, Convertors, Transformers, Pumps, Heating
Elements, Signal Transmitters, Fire Detectors, Magnets,
Relays, Chokes, Coils, Power Supplies, Inverters |
| |
Encapsulated
Thermostats for Electronics
|
| |
F11-E06
>
Online Tech Info
The CANTHERM F11-E06
has been designed to protect today's technology and
meet the requirements of tomorrow's innovations. The
F11 snap action bimetallic element will respond rapidly
and accurately to changes in the temperature of the
surface to which it is mounted or the air temperature
in an enclosure. The single pole, single throw contacts
can be configured as either normally open or normally
closed, operating on rise in temperature.
F11-E06
>
PDF Tech Info, Schematics and More |
| Applications
Power Supplies, Power
Semi-Conductors, Electronic Ballasts, Fluorescent and
HID Ballasts, Motor and Transformer Protection |
| |
Temperature
Protection for Electronics
|
|
E-Type >
Online Tech Info
Types
E 05, E06, E 11,E 15, E 16, E 18, E 21, E 22, E 23
and E 26 are thermal cutouts. Within limits they can
also be used as temperature regulators. A bimetal
snap disc with single or double contact opens or closes
an electric circuit when reaching a pre-set temperature.
E-Type >
PDF Tech Info, Schematics and More |
| Applications
Power
Supplies, Power Semi-Conductors, Electronic Ballasts,
Fluorescent and HID Ballasts, Motor and Transformer
Protection |
| |
|
| |
Some files presented here are PDF
files and require Adobe Reader to view them.
|
|
Thermal
Cutouts
(800) 561-7207 |
(330)
966-3796 |