D10, D20, D30, D40

Appareils Électroménagers. Électronique, Radiateur Soufflant, Industrie Automobile.

Appareils Électroménagers. Électronique, Radiateur Soufflant, Industrie Automobile.

Household appliances, Electronics, Fan Heaters, Automotive Industry

Benefits

More safety by self hold types, Various housings, Manual reset

ratings \ TCO		D10V	D20V	D30V	D40V
function		automatic	manual	self hold 230 V	self hold 120 V
version		normally closed
VDE	rated current at 50 / 60 Hz ( power factor 0.95 / 0.6 )	16 A / 2.5A (250 V)	19.2 A / 2.5A (250 V)	16 A / 2.5A (230 V)	19.2 A / 2.5A (120 V)
	switching cycles	10,000	1,000	10,000	8,000
	temperature range T_a (steps in 5 K)	70°C … 160°C	70°C … 130°C / 140°C	70°C … 160°C
UL	rated current at 50 / 60 Hz ( power factor 1.0 / 0.75 )	16 A / 6.3A (250 V)			16 A / – (125 V)
	switching cycles	6,000
	temperature range T_a (steps in 5 K)	70°C … 160°C
max. current at 250 V 50/60Hz( power factor 0.95 )		25 A
switching cycles under max. current		200
tolerance		standard: +/- 5 K
feature of automatic action		1.B, 1.C	2.B, 2.C	2.C.AK
contact resistance		<50 mΩ
hysteresis / reset temperature ¹⁾		30 K +/- 15 K / –	– / < -20°C; < -10°C	-/ < -20°C ²⁾
degrees of protection provided by enclosures (EN 60529)		IP00
suitable for use in protection category		I, II
approvals	VDE / ENEC	EN 60730-1 / 2-3 ³⁾ / -2-9
	UL	UL 873
	CSA	C22.2 No. 24 ³⁾
	CQC	GB14536.1-1998 / GB14536.10-1996⁴⁾
1) at the Ta (upper and lower) limits the hysteresis could deviate 2) without air Åow 3) D12D only/2,5A/max. 140°C 4) different power rating 5) details on request

code	used in TCO	illust.	drawing dimensions (mm)	technical specification	approvals
standard	D10, D12 D20, D22 D30, D32 D40, D42			terminals for soldering CuNi18Zn20 ¹⁾	VDE,UL, CSA
A308	D10, D12 D20, D22 D30, D32 D40, D42			terminals for soldering bent 90° CuNi18Zn20 ¹⁾	VDE, UL, CSA

TCO		illust.	drawing dimensions (mm)	technical specification	approvals
standard	current-time based ¹⁾
D10V	D12V			base of thermosetting plastic	VDE,UL, CSA
D10V D30V D40V with housing G115	D12V D32V D42V with housing G115			housings PPS base of thermosetting plastic	VDE, UL, CSA
D20V with housing G776	D22V with housing G776			manual reset housings PA/PPS base of thermosetting plastic	VDE, UL, CSA
D10V with housing G774	D12V with housing G774			housings PA/PPS base of thermosetting plastic	VDE, UL, CSA

1) For current-time based types (execution D, J, K, L, M, P, R, V) the following information must be provided: • DC or AC voltage U_N in Volts. • Continuous operating current I_c in Amps at which the switch must not respond. • Current level I₀ in Amps at which the switch must respond. • Response time t₀ (in seconds ± tolerance) within which the switch must respond after reaching I₀. • Ambient temperatures which could be experienced both in normal operation and in switching conditions. • Maximum current in Amps. * temperaturesensitive area. ____________ • For special applications version P is available with a very low self heating rate. • Manual reset: The maximum operating force should not exceed 6 N. The control should not be reset before the starting conditions are reached, meaning there should be a satisfactory cooling down time! Technical data on request.

Marking
D10V type and execution E country (E=Spain) 12005 response temperature (120°C), tolerance (± 5K) 049 date of manufacture (April 2009) D12D type and execution H country (H=China) –123 customised type with drawing number 049 date of manufacture (April 2009)